ChenTao · Protective film manufacturer
PE Electrostatic Protective Film
Clear PE film that clings to smooth surfaces without a glue coating. Protect glass, display covers and polished panels during handling, storage and shipping. Custom rolls and pre-cut shapes available.
Temporary surface protection. Apply to a clean, dry surface and peel away after use.
- Material
- Clear PE film
- Attachment
- No glue coating
- Thickness
- 0.03–0.15 mm
- Roll length
- 200 m / custom
Product specifications
Product details at a glance
The essential data for an early fit check.
- Material
- Polyethylene (PE) film
- Attachment
- Static cling; no applied adhesive coating
- Appearance
- Clear film for seeing the surface underneath
- Thickness range
- 0.03–0.15 mm (30–150 µm)
- Roll width
- Up to 1200 mm; slit to the required width
- Roll length
- 200 m; custom lengths on request
- Supply formats
- Rolls and custom pre-cut shapes
- OEM options
- Core material and diameter, packaging and printed labels
These dimensions are the starting range for an inquiry. Your quotation confirms the chosen thickness, cut size, tolerances and roll length. Test a sample on the actual surface before ordering in bulk.
Need a specific peel force, temperature range or anti-static performance? Tell us the surface, exposure time and required test so we can review the right film.
Ask a Technical QuestionHow the film works
A film layer. No glue coating.
- 01Protective PE filmA flexible covering takes the light rubbing and dust that would otherwise reach the finished surface.
- 02Close surface contactThe film clings without an added glue layer. Smooth, clean surfaces allow more even contact.
- 03Your glass or panelThe protected part stays underneath. Peel the film off when temporary protection is no longer needed.
Common applications
Where this film is commonly used
Cover a smooth, finished surface to help keep off dust and light handling marks. Remove the film when the part is ready for its next step.
Glass panels
Cover glass panels while they move between workstations or wait for packing. Keep grit out from under the film.
Display cover surfaces
Cover the smooth outer face during assembly and packing. Specify anti-static needs separately for sensitive electronics.
Acrylic & PC panels
Protect signs, clear covers and glossy panels from light contact marks. Trial any hard coating or printed finish first.
Polished metal panels
Cover a smooth finished face during indoor handling. Check cling and removal on the actual metal finish.
Tell us which surface needs protection, how it is handled and when the film will be removed.
Prepare your inquiry
Find a film for your surface
Choose the surface and purpose, then add the sizes you know. We use these details to prepare your sample recommendation and quotation.
Animated usage guide
How to Apply & Remove the Film
Follow one glass panel from cleaning to removal. Choose a step to inspect it, or play the full sequence.
Wipe with a clean, soft cloth
Press a clean, soft cloth flat against the glass and wipe away dust and grit. Use a cleaning method suitable for the surface, then let it dry completely.
Illustrated dry application on smooth glass. Blue makes the clear film visible. Use clean tools that will not scratch your surface.
Check for lifting, haze or marks after the full protection period. For coated surfaces, heat or outdoor exposure, include those conditions in the sample trial. Remove the film before the product enters its intended service.
From inquiry to production
A clear next step for your project
Start with what you know. Confirm the product and commercial details before placing an order.
Share the requirement
Send the surface material, finish, film thickness, width, length and quantity. For pre-cut parts, include a drawing with units and tolerances.
Review the proposal
We prepare the specification and quotation, including slit rolls, pre-cut shapes, core dimensions and OEM packaging. Request samples for a trial on your part.
Confirm before production
Approve the sample, dimensions, drawing and packaging. Check cling, appearance and removal after the expected protection time before bulk production.
Tell us the size you need. Sample availability and terms are confirmed for your request.
Frequently asked questions
Product questions & ordering information
Product & use
How does the film stay in place without glue?
The PE film is made to cling through close contact with a smooth surface, without an applied adhesive coating. Clean, dry glass and glossy panels are useful starting points. Roughness, dust, oil and loose edges can reduce contact.
Which surfaces can I protect?
Typical uses include smooth glass, acrylic or PC panels, display covers and polished metal. Try coated or printed surfaces on a small area first. This film is for temporary handling and packing protection; it is not a permanent window film or a glass safety film.
Does static cling mean the film is anti-static?
No. Static cling describes how the film attaches. Anti-static or ESD performance concerns how a material controls electrical charge. If your process needs it, specify the required test and acceptance limits when requesting a film.
Will removal leave marks, and can I reuse it?
There is no applied glue layer to transfer, but surface compatibility still needs checking. Peel the film slowly and inspect the part after the expected protection time. Dust, contamination and stretching can affect reuse, so do not assume a used piece will perform like fresh film.
How do I choose thickness and custom dimensions?
Choose thickness for the handling and flexibility your part needs, then trial the film. We offer 0.03–0.15 mm thickness, roll widths up to 1200 mm, slitting and custom pre-cut shapes. Send the size, units, quantity, tolerances and drawing for a quotation.
Ordering & delivery
What are the sample and bulk order lead times?
Samples can be prepared within 48 hours. Bulk orders usually take 7–15 working days. Lead times start when the required payment is received; for orders on deposit terms, this means receipt of the deposit. Shipping time is additional.
How is the film packed? Can I customize it?
Standard packing is clear bags and cartons. Custom packaging and printed labels are also available. Include your packaging or label requirements with your inquiry.
How can you ship my order?
We support express courier, air freight and sea freight. You can also use your own freight forwarder. Share your destination and preferred shipping method so freight costs and estimated transit time can be confirmed for your order.
What are your payment methods and terms?
Payment is by T/T (bank transfer). Orders below US$5,000 require 100% payment in advance. Orders of US$5,000 or more require a 50% deposit, with the remaining 50% paid before shipment.
What will the quotation confirm?
The quotation confirms the product specification, size or drawing, quantity, price, minimum order quantity, packing, production lead time, shipping arrangements and payment terms. Include any sample requirements with your inquiry.
Related protective films
Other protective film options
Different films serve different tasks. Compare the construction and removal method for your process.
Next step
Get a product quotation
Share the details you know in the form below. For drawings or photos, email frank@cttape.com with your company name and project reference.
Your quotation confirms the specification, price, MOQ, packing, lead time, shipping and payment terms.